Fujitsu CELSIUS H250 Operating Manual Download

Page: 18 / 85

Preparing the notebook for use

Switching the notebook on for the

rst time

Notebook:

Switchingon forthe

rsttime

When you switch your notebook on for the

rst time, the supplied software is

installed and con

gured. Due to the fact that this installation procedure must not

be interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.

During installation, the notebook must only be rebooted when you are requested to do so!

►

Switch the notebook on (refer to the section entitled "Switching on the
notebook" in the EasyGuide).

The installation process will start automatically.

►

During installation, follow the on-screen instructions.

Consult the operating system manual if anything is unclear about the requested input data.

The "Drivers & Utilities" CD/DVD or the Internet at:

"http://ts.fujitsu.com/support"

provides further information on the system, drivers, utilities, updates, manuals etc.

A26391-K200-Z226-1-7619, edition 2

Summary of Contents for CELSIUS H250






















































































Search results

Summary of Contents for CELSIUS H250

Reviews:

Related manuals for CELSIUS H250

Brands by name

Popular brands

Fujitsu CELSIUS H250, Operating Manual

Search results

Summary of Contents for CELSIUS H250

Reviews:

Related manuals for CELSIUS H250

Brands by name

Popular brands