manualshive.com logo in svg

Fujitsu C150-E049-02EN, Oem Manual, Page: 6 / 236

Share
Download
Fujitsu C150-E049-02EN Oem Manual Download Page 6

ii

M3099GX/GH OEM Manual

Chapter 6   Document Specification

Chapter 6 provides document specifications (size, type, limitations,
grounding color area, drop-out color, and job separation sheet) for
the scanner.

Chapter 7   Consumables and Accessories

Chapter 7 provides consumables and accessories.

Chapter 8   Cleaning

Chapter 8 provides cleaning locations and frequencies, cleaning
tools, and procedures.

It is recommended that you thoroughly familiarize yourself with the
contents of this manual before attempting to use the scanner.
Operators in particular must have read Chapter 4, “Basic
Operation.”

Special information, such as warnings, cautions are indicated as
follows:

WARNING

A WARNING indicattes that personal injury may result if you do
not follow a procedure correctly.

CAUTION

A CAUTION indicates that damage to the scanner may result if you
do not follow a procedure correctly.

NOTICE

A NOTICE provides “how-to” tips or suggestions to help you
perform a procedure correctly.  NOTEs are particularly useful for
first-time users.

Conventions

#00-3 Preface.pm5

98.2.22, 1:13 PM

2

Summary of Contents for C150-E049-02EN













































































































































































































































Reviews:

No comments