manualshive.com logo in svg

Fujitsu C150-E049-02EN, Oem Manual, Page: 194 / 236

Share
Download
Fujitsu C150-E049-02EN Oem Manual Download Page 194

M3099GX/GH OEM Manual

7-1

CONSUMABLES
AND
ACCESSORIES

7

CHAPTER

CONSUMABLES AND ACCESSORIES

This chapter provides consumables and accessories of the scanner.

Table 7.1 lists consumables used for the scanner.  Be sure to keep
some spare parts in stock.
The abrasion counter can be used to check the number of scanned
documents. (See page 4-6)

Table 7.1 Consumables

Name

Lamp

Pick roller

Roller ASY

Belt

Belt ASY

Pad

Print head

Remark

Up to 500 hours or more. Two lamps
per scanner

Up to 300,000 sheets or one year.
Requires two per scanner.

Up to 600,000 sheets or one year. This
part contains Pick Roller but the life of
the Roller Units does not include the
life of the Pick Roller.

Up to 300,000 sheets or one year.

Up to 600,000 sheets or one year. This
part includes Separation Belt but the
life of the Belt Assembly does not
include the life of the Separation Belt.

Up to 300,000 sheets or more.

Black ink for endorser option. Ten
print heads are packed. Each print
head has the life of 20,000 sheets at 10
characters per sheet.

Consumables

Specification

CA02950-0548

CA01023-F242

CA02869-F230

CA02869-Y218

CA02869-F220

CA01023-G290

CA01023-0701

#07 Chapter 7

98.2.22, 1:52 PM

1

Summary of Contents for C150-E049-02EN













































































































































































































































Reviews:

No comments