manualshive.com logo in svg

Fujitsu C150-E049-02EN, Oem Manual, Page: 5 / 236

Share
Download
Fujitsu C150-E049-02EN Oem Manual Download Page 5

M3099GX/GH OEM Manual

i

Preface

This manual provides technical information required to use the
original equipment manufacturing (OEM) M3099G image scanner.
The manual is organized as shown below.

Chapter 1   Overview

Chapter 1 provides the scanner features, configuration, and
operation.

Chapter 2   Specifications

Chapter 2 provides general, electrical, environmental, physical, and
option specifications.

Chapter 3   Interface Specifications

Chapter 3 provides SCSI interface specifications.

Chapter 4   Basic Operation

Chapter 4 provides power switch operation, opening/closing the
upper transport unit, operator panel arrangement and functions,
messages, loading document, and replacement of parts.

Chapter 5   Error Processing and Recovery

Chapter 5 provides how to handles temporary errors and equipment
errors and what the operator should do to recovery.

#00-3 Preface.pm5

98.2.22, 1:13 PM

1

Summary of Contents for C150-E049-02EN













































































































































































































































Reviews:

No comments