Fujitsu BS2000, User Manual

Page: 113 / 374

Systems on Server Units Setting BS2000 operation mode
U41855-J-Z125-3-76
111
D
ok
us
ch
a
bl
on
en 1
9x
24 V
e
rs
ion 7.
4
de f
ür
F
ram
e
M
ak
er
V
7.
x
vo
m
09
.0
2.
20
10
©
c
og
ni
ta
s Gm
b
H
20
01
-20
10
19
. M
ar
ch
201
8 S
ta
nd 18
:2
5.
47
P
fad
: P
:\F
T
S
-B
S
\S
er
ve
r\
S
E
-S
er
ve
r\
S
E
-D
ok
u\
13
039
12
_B
uV
_0
62
\B
u
V
_
e\
bu
v.
k0
5
i
If you change the device configuration of the monitor VM, please note the following:
– If the devices of the monitor VM are assigned or removed using the VM specific
tabs
Disks
,
KVP
,
LAN
,
Tape devices
or
All devices
, the changes only remain active
until the BS2000 operation mode is reset or until the SU is restarted. The same
applies for changes of the device configuration done via VM2000 commands
that refer to the monitor VM.
– If changes to the device configuration are to remain active after a change of the
BS2000 operation mode or restart of the SU, they have to be entered and
activated in the startup configuration of the monitor VM as well (see group
Startup settings: Monitor VM
of the
BS2000 operation mode
tab).
– Changes to the startup configuration of the monitor VM have no immediate
effect on the running monitor VM.
The groups below show the current startup settings for the operation mode concerned.
Ê
To change the main memory size for the Native BS2000 system, in the
Startup settings:
Native BS2000 system
group, click the
Change
icon.
Ê
To change the number of virtual CPUs, the main memory settings, the device lists or the
access password for the monitor VM, in the
Startup settings: Monitor VM
group, click the
Change
icon.
Changes will take effect only after the setting has been activated by clicking the
Activate
icon
in the group concerned or after you have switched the operation mode.