Fujitsu BS2000 User Manual Download Page 112

Page: 112 / 374

Setting BS2000 operation mode

Systems on Server Units

110

U41855-J-Z125-3-76

5.1.2 Server Unit x86

Select

Systems

→

[

<se server>(SE<model>)

→

]

<unit> (SU<x86>)

BS2000 operation mode

tab.

The

BS2000 operation mode

tab in the

BS2000 operation mode

group displays the operation

mode set (Native BS2000 mode or VM2000 mode) and permits this setting to be changed:

Changing the operation mode

You can change the operation mode only when BS2000 is not active. In VM2000 mode this
applies for all BS2000 VMs.

Click the

Change

icon and confirm the switch to the other operation mode.

When you switch mode, the Automatic IPL option is implicitly set to No. This setting

can be changed again after the operation mode has been changed successfully
(

Options

VM options

tab).

Summary of Contents for BS2000























































































































































































































































































































































































Search results

Summary of Contents for BS2000

Reviews:

Related manuals for BS2000

Brands by name

Popular brands

Fujitsu BS2000, User Manual

Search results

Summary of Contents for BS2000

Reviews:

Related manuals for BS2000

Brands by name

Popular brands