background image

En-2

OPERATING MANUAL

 

WARNING

• Do not install the unit in area 

¿

 lled with mineral oil such as a 

factory or area containing a large amount of splashed oil or 
steam such as a kitchen.

• Do not start or stop the operation of this product by inserting 

or pulling out the power plug, or by turning on or off the 
circuit breaker.

• Do not use in

À

 ammable gases near the unit.

• Do not expose yourself directly to the cooling air

À

 ow for 

many hours.

• Do not insert your 

¿

 ngers or any other objects into outlet 

port, open panel, or intake grille.

• Do not operate with wet hands.
• Do not use means to accelerate the defrosting process or to 

clean the appliance, other than those recommended by the 
manufacturer.

• Do not pierce or burn.

 

CAUTION

• Provide occasional ventilation during use.

• Always operate the unit with air 

¿

 lters installed.

• Ensure that any electronic equipment is at least 1 meter 

away from either the indoor unit or outdoor unit.

• Unplug the power supply cable when not using the indoor 

unit for an extended period.

• After long period of use, check whether the installation stand 

does not deteriorate to prevent the unit from falling down.

• The air

À

 ow direction and the room temperature should be 

carefully considered when you use this product in a room 
with infants, children, elderly or sick persons.

• Do not place vase or water container on the unit.

• Do not place any other electrical products or household 

belongings under indoor unit or outdoor unit.

  Dripping condensation from the unit might get them wet, and 

may cause damage or malfunction of your property.

• Do not expose the unit directly to water.

• Do not use this product for preservation of food, plants, 

animals, precision equipment, art work, or other objects. This 
may cause quality deterioration of those items.

• Do not expose animals or plants to the direct air

À

 ow.

• Do not drink the drainage from the air conditioner.

• Do not pull the power supply cable to disconnect the plug.

• Do not touch the aluminum 

¿

 ns of heat exchanger built-in 

the indoor or outdoor unit to avoid personal injury when you 
install or maintain the unit.

• Do not direct the air

À

 ow at 

¿

 replaces or heating apparatus.

• Do not block or cover the intake grille and the outlet port.

• Do not apply any heavy pressure to radiator 

¿

 ns.

•  Do not climb on, place objects on, or hang objects from the unit.

Safety Precautions (continued)

 Indoor unit accessories

Remote 
controller

Batteries

Air cleaning 

¿

 lters

Filter holders

Remote controller 
holder

Tapping screws
(M3 × 12 mm)

Remote controller holder installation

3

2

1

Screws

Insert

Slide up

 

WARNING

Take care to prevent infants and young children from acciden-
tally swallowing the batteries.

 

CAUTION

• Do not attempt to recharge dry batteries.

• Do not use dry batteries that has been recharged.

 

Battery (R03/LR03/AAA × 2) loading and remote controller preparation

1

4

2

3

6

7

8

5

9

5

    Press CLOCK ADJUST button to start clock setting.

6

    Set the day of the week by pressing SELECT button (Monday to 

Sunday). *By pressing the TEMP. (

š›

) buttons, the time indicator 

can be changed from a 24-hour to a 12-hour clock.

7

    Press NEXT button to continue.

8

    Set the time by pressing SELECT button.

Pressing 

U

 or 

V

 changes the value by the minute.

Pressing down on 

U

 or 

V

 changes the value by 10 minutes.

9

    To complete, press the SEND button close to the indoor unit. 

Settings may not be properly sent if pressed from a distance.

Notes:

•  Use speci

¿

 ed type of batteries only.

•  Do not mix different types or new and used batteries together.
• Batteries can be used about 1 year in ordinary use.
•  If the remote control range noticeably shortens, replace the batter-

ies, and press RESET button as shown in page 5.

9320455088_OM_EN.indd   2

3/23/2017   1:55:02 PM

Summary of Contents for ASTG18CMCB













Reviews: