En-9
AIR CONDITIONER Wall Mounted Type
OPERATING MANUAL
General Information on Operation
Auto-restart function
In event of power interruption such as a blackout, the air
conditioner stops once. But it restarts automatically and
performs previous operation when the power supply is resumed.
If any power interruption occurs after the timer is set, counting
down of the timer will be reset.
After the power supply is resumed, the TIMER indicator on the
indoor unit blinks to notify you that there has been a timer fault.
In such a case, reset the timer for your opportune time.
Malfunctions caused by other electrical devices:
Use of other electrical appliances such as an electric shaver or
nearby use of a wireless radio transmitter may cause the malfunction
of the air conditioner.
If you encounter such a malfunction, turn off the circuit breaker once.
Then turn it on again, and resume operation by using the remote
controller.
Temperature and Humidity Range
Permissible ranges of temperature and humidity are as follows:
COOL/DRY
Indoor temperature
About 18 °C to 32 °C
Indoor humidity
Below approximately 80%.
If the air conditioner is used continuously for many
hours, water may condense on the surface and drip.
If the unit is used under higher temperature conditions than those noted here, the automatic protection circuit may operate, interrupting the operation.
If the unit is used under lower temperature conditions than those noted here, the heat exchanger may freeze, causing water leakage or other mal-
function.
Ɣ
Do not use the air conditioner for any purpose other than room cooling/dry or fan.
9320455088_OM_EN.indd 9
3/23/2017 1:55:06 PM
