Fujitsu AOT13PNA, Operating Manual

Page: 9 / 19

– 63 –
• To Change the Timer Setting
Perform steps 2 and 3.
• To Stop Air Conditioner Operation while the
Timer is Operating
Press the START/STOP button.
Use the SET TEMP.SET TIME button (Fig. 6
@2
)
to adjust the desired OFF time or ON time.
Set the time while the time display is flashing
(the flashing will continue for about five seconds).
button : Press to advance the time.
button : Press to reverse the time.
About five seconds later, the entire display will
reappear.
• To Change Operating Conditions
If you wish to change operating conditions (Mode,
Fan Speed, Thermostat Setting), after making the
timer setting wait until the entire display reappears,
then press the appropriate buttons to change the
operating condition desired.
About the Program timer
• The PROGRAM timer allows you to integrate OFF timer and
ON timer operations in a single sequence. The sequence can
involve one transition from OFF timer to ON timer, or from
ON timer to OFF timer, within a twenty-four hour period.
• The first timer function to operate will be the one set nearest
to the current time. The order of operation is indicated by the
arrow in the Remote Control Unit's display (OFF
ON, or
OFF ON).
• One example of Program timer use might be to have the air
conditioner automatically stop (OFF timer) after you go to
sleep, then start (ON timer) automatically in the morning
before you arise.
TIMER OPERATION
To Use the ON timer or OFF timer
Press the START/STOP button (Fig. 6
@6
).
(if the unit is already operating, proceed to step 2).
The indoor unit's OPERATION Indicator Lamp
(red) (Fig 3.
t
) lights and the TIMER Indicator
Lamp (green) (Fig 3.
y
) light.
• To Cancel the Timer
Use the TIMER button to select “TIMER RESET.”
The air conditioner will return to normal operation.
Press the TIMER button (Fig. 6
@4
) to select
the OFF timer or ON timer operation.
Each time the button is pressed the timer func-
tion changes in the following order :
The indoor unit's TIMER Indicator lamp (green)
(Fig. 3
y
) will light.
1
2
3
RESET OFF ON
PROGRAM (OFF ON, OFF ON)
Before using the timer function, be sure that the
Remote Control Unit is set to the correct current time
(See Page 60).
To Use the Program timer
Press the START/STOP button (Fig. 6
@6
).
(if the unit is already operating, proceed to
step 2).
The indoor unit's OPERATION Indicator Lamp
(red) (Fig. 3
t
) will light.
• To Cancel the Timer
Use the TIMER button to select “TIMER RESET.”
The air conditioner will return to normal operation.
Set the desired times for OFF timer and
ON timer.
See the section "To Use the ON Timer or OFF
Timer" to set the desired mode and times.
About three seconds later, the entire display will
reappear.
The indoor unit's TIMER Indicator Lamp (green)
(Fig. 3
y
) will light.
• To Change the Timer Setting
1. Follow the instructions given in the section “To
Use the ON Timer or OFF Timer” to select the
timer setting you wish to change.
2. Press the TIMER button to select either OFF
ON or OFF ON.
Press the TIMER button (Fig. 6
@4
) to select
the PROGRAM timer operation (either OFF
ON or OFF ON will display).
The display will alternately show “OFF timer” and
“ON timer”, then change to show the time setting
for the operation to occur first.
• The PROGRAM timer will begin operation.
(If the ON timer has been selected to oper-
ate first, the unit will stop operating at this
point).
About five seconds later, the entire display will
reappear.
• To Stop Air Conditioner Operation while the
Timer is Operating
Press the START/STOP button.
• To Change Operating Conditions
If you wish to change operating conditions (Mode,
Fan Speed, Thermostat Setting), after making the
timer setting wait until the entire display reappears,
then press the appropriate buttons to change the
operating condition desired.
1
2
3