background image

En-3

PRECAUTIONS

DANGER

Do not stay in direct cooling airflow for long periods.

Excessive direct exposure to chilled air could be bad for your health.

Be especially careful when going to bed, and in rooms where infants, aged, or sick
people are staying.

Do not insert fingers or objects into the outlet port or intake grilles.

A fan operates at high speed inside the unit, and personal injury could result.

Be particularly careful regarding small children.

Do not start and stop air conditioner operation by disconnecting
the power cord and so on.

Take care not to damage the power cord.

Do not stand heavy items on the power cord, or allow it to be pulled. Such treatment
could damage the insulation, resulting in fire hazard and electrical shock.

WARNING

If the power supply cord of this air conditioner is damaged, it must be replaced
by the manufacturer or its authorized service personnel only in order to avoid
a safety hazard.

In the event of a malfunction (burning smell, etc.), immediately
stop operation, disconnect the power plug, and consult
authorized service personnel.

Continuing to operate the unit under such conditions could lead to hazard of fire
or electrical shock.

If the power supply cord of this appliance is damaged, it should
only be replaced by the authorized service personnel, since
special purpose tools and specified cord are required.

Summary of Contents for AKY12U
















Reviews: