background image

En-7

Power Supply

Connect the Power Supply Plug to an electrical point.

Connect securely, without looseness.

In the case of direct line connections, turn on the breaker.

MASTER CONTROL Switch

POSITION

FUNCTION

)

   (OFF)

The air conditioner is switched off.

FAN

Fan only is operating to provide filtered air without
cooling effect.

SUPER QUIET

Fan speed is low and cooling efficiency is intermediate
with low noise level.

NORMAL

A cooling effect is obtained by a quieter operation than
“HIGH POWER”.

HIGH POWER

Fan speed is at its maximum resulting in maximum

cooling effect.

Cooling

To obtain maximum cooling effect in the hot summer select position HIGH
POWER on the master control. Maximum moisture removal, air circulation and
dust removal are effected at the same time.
Selection of SUPER QUIET reduces operating noise.

Air Circulation

To maintain a comfortable room temperature an important factor is the circulation
of air. Room air can be circulated without cooling by selecting FAN position on
the master control.

Air circulation only without cooling effect may also be achieved with the thermostat
knob turned counterclockwise to “1” position and with the master control knob
at either “cool” position.

AIR CONDITIONER OPERATION

COOLING MODEL

Summary of Contents for AKY12U
















Reviews: