background image

En-4

For Powerful operation  ................. Refer to page 8.

Activates or deactivates the Powerful 

operation.

For Air

fl

 ow settings  ....................... Refer to page 5.

Controls the fan speed.

 

Sets the automatic Swing operation.

 

Controls the horizontal air

fl

 ow direction.

Controls the vertical air

fl

 ow direction.

For Timer operations ..................... Refer to page 5.

Activates or deactivates the Weekly timer.

Activates or deactivates the On timer, O

  

timer, or Program timer.

Activates or deactivates the Sleep timer.

Starts the timer setting.

Sends the timer or clock setting to the indoor 
unit.
By pressed down, enters the wireless LAN 

setting mode. (Refer to page 10.)
Forwards the timer or clock setting to the 
next step.
Returns the timer or clock setting to the 
previous step.
By pressed down, activates or deactivates the 

wireless LAN control. (Refer to page 10.)

Adjusts the value of the timer or clock 
settings.

Starts the clock setting.

After replacing batteries

 Press this button as shown in the following 

fi

 gure. 

Use a tip of a ballpoint pen or other small object.

RESET

 3.3. Inserting batteries

Battery type: R03/LR03/AAA x 2

1

2

3

RESET

6
8

7

5

9

4

1

 Pull the cover in the direction of the arrow and open it 

until it is trapped.

2

 Remove the cover.

Turn the remote controller over and push the back 

side of the cover and remove the claws by curving 

the cover.

Pull in the direction of the arrow while curving the 

cover.

3

 Put batteries as shown in the figure above.

4

 Press 

 as shown in the 

fi

 gure above. 

Use the tip of a ballpoint pen or other small objects.

 

5

 

 

Press 

 to start setting day of the week and clock.

6

 

  

Press 

(

)

 to set day of the week (Monday to 

Sunday). 

7

 

 

Press 

 to continue.

8

 Press 

(

)

 to set the clock.

Press the buttons to change the clock by a minute.
Press and hold the buttons to change the clock by 10 minutes.

 * 

 

To switch the time indicator (12-hour 

 24-hour), press 

9

 

 

Press 

 to complete the setting.

 

Be close to the indoor unit. If you press the button from a 
distance, settings may not be properly sent.

10

 Install and close the cover.

NOTES:

• Use speci

fi

 ed type of batteries only. 

• Do not mix di

 erent types or new and used batteries together.

• Batteries can be used about 1 year in ordinary use.
•  If the remote control range noticeably shortens, replace the 

batteries, and press 

 as shown in the 

fi

 gure above.

9387602098̲OM.indb   4

9387602098̲OM.indb   4

2022/09/26   19:41:38

2022/09/26   19:41:38

Summary of Contents for Airstage Wall Series

















Reviews: