En-11
Initialization (reset)
Initialize (reset) this product in the following situations:
• Changing the wireless router
• Disposing this product
• Transferring this product to a third party
Unregister the air conditioner
Unregister the air conditioner by using the mobile app. (Refer to the
operation manual of the mobile app for details.)
Initialization of the W-LAN adapter
NOTES:
If you do not press any buttons of the remote controller for 60
seconds, the remote controller display will return to the original
display.
1.
Press
on the remote controller until
only the clock is displayed on the remote
controller display.
2.
Press down
on the remote controller
for more than 5 seconds.
will be displayed on the remote controller
display.
3.
Select using
.
4.
Press
.
on the remote controller display will blink.
5.
Press
.
[
] indicator on the indoor unit will turn o
ff
after blinking fast.
To continue use
If you or third party wishes to continue use of the product, follow the
procedures in “Air conditioner registration (pairing of W-LAN adapter)”
to reconnect to a di
ff
erent wireless router.
NOTES:
Wireless LAN setup is not possible if the previous owner did
not unregister or initialize this product. In this case, please
contact your authorized service personnel.
Removing W-LAN adapter
CAUTION
• Be sure to turn o
ff
the power supply of the air
conditioner when installing or removing this product
to avoid the risk of electric shock.
• Do not put
fi
ngers, sticks etc. in the connection part of
this product and the connection slot of the indoor unit.
Otherwise, electric shock or damage to the product
may occur.
• Do not standing on an unstable platform when
installing or removing this product to avoid injury.
1.
Be sure to turn air conditioner o
ff
and to disconnect all the
power supply.
2.
Open the intake grille.
3.
Open the W-LAN adapter cover until it snaps.
4.
Remove the W-LAN adapter from the connection slot of the
indoor unit in the direction as shown in the
fi
gure.
5.
Close the W-LAN adapter cover and the intake grille.
10. SETTINGS ON INSTALLATION
10.1. Remote controller custom code setting
By setting custom code of indoor unit and remote controller, you can
specify the air conditioner which the remote controller controls.
When two or more air conditioners are in the room and you wish to
operate them separately, set the custom code (4 selections possible).
NOTES:
If custom codes is di
ff
erent between the indoor unit and the
remote controller, the indoor unit cannot receive a signal from
the remote controller.
How to set the remote controller custom code
1.
Press
until only the clock is displayed on the remote
controller display.
2.
Press down
for more than 5
seconds.
The current custom code will be
displayed (initially set to A).
3.
Press
to change the
custom code between A
↔
B
↔
C
↔
D
(
).
* Match the custom code on the display
to the air conditioner custom code.
4.
Press
again.
The custom code will be set.
The display will return to the clock display.
• To change the air conditioner custom code, contact an authorized
service personnel (initially set to A).
• If you do not press any buttons for 30 seconds after the custom
code is displayed, the display returns to the clock display. In this
case, repeat the setting from step 2.
• Depending on the remote controller, the custom code may return
to A when replacing the batteries. In this case, reset the custom
code as necessary. If you do not know the air conditioner custom
code, try each code until you
fi
nd the code which operates the air
conditioner.
9387602098̲OM.indb 11
9387602098̲OM.indb 11
2022/09/26 19:41:41
2022/09/26 19:41:41
