Fujitsu AG*G09LVCA, Technical Manual

Page: 26 / 47

- (01 - 23) -
FL
OO
R T
YP
E
A
G

G
09
-1
4LV
C
A
FL
OO
R T
YP
E
A
G

G
09
-1
4LV
C
A
CONTENTS OF FUNCTION SETTING
„ „
Follow the instructions in the Local Setup Procedure, which is supplied with the remote controller, in •
accordance with the installed condition.
After turning on the power, perform the Function Setting by using the remote controller.
The settings may be selected between the following two: Function Number or Setting Value.
•
Settings will not be changed if invalid numbers or setting values are selected. •
1) Filter sign
2) Vertical airflow direction range control
3) Room temperature control for cooling
4) Room temperature control for heating
5) Auto restart
6) Room temperature sensor switching
7) Remote controller signal code
8) External input control
9) Indoor unit fan control for energy saving for cooling
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
(

. . .Factory setting)
Setting Description Function Number Setting Value
Standard (400 hours)
11
00
Long interval (1,000 hours) 01
Short interval (200 hours) 02

No indication 03
2) Vertical airflow direction range control
In a concealed installation, change the setting to "Fixed" (02) to restrict the movement of the upper
air outlet so that the airflow is only towards the horizontal direction.
(

. . .Factory setting)
Setting Description Function Number Setting Value

Standard
23
00
(Setting prohibited) 01
Fixed (Concealed) 02
3) Room temperature control for cooling
Depending on the installed environment, correction of the room temperature sensor may be
required.
Select the appropriate control setting according to the installed environment.
(

. . .Factory setting)
Setting Description Function Number Setting Value

Standard
30
00
Slightly lower control 01
Lower control 02
Higher control 03