manualshive.com logo in svg

Fujitsu 6240 - fi - Document Scanner, Operator'S Manual

Share
Download
Fujitsu 6240 - fi - Document Scanner Operator'S Manual Download Page 123

3.16 Splitting Documents by Patch Code

 

 

6.  Specify the created batch profile, and then perform the batch scan.

 

For how to perform the batch scan, see "

Batch Scan

" in Section "

2.6 How to Use ScandAll PRO.

"

 

 

 

 

 HINT 

When storing each of the scanned documents, which are separated with patch-code sheets, 

in separate folders, change the settings in the [Name Rule] dialog box opened by clicking the 

[Name Rule] button on the [File format and Name scheme] tab in the [Profile Editor] dialog 

box. 

Mark the [Create Directories Separately] checkbox in the [Name Rule] dialog box.

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_16_01.htm (3 of 4)9/28/2007 2:39:14 PM

Summary of Contents for 6240 - fi - Document Scanner


















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands