manualshive.com logo in svg

Fujitsu 6240 - fi - Document Scanner, Operator'S Manual, Page: 110 / 241

Share
Download
Fujitsu 6240 - fi - Document Scanner Operator'S Manual Download Page 110

3.13 Splitting a Page in Two Pages

 

 

 

 HINT 

When a double-sided document is scanned in Duplex mode, the scanned document image is 

output according to the [Flip Side Rotation] setting in the order presented below:

●

     

Book: Upper half 

→

 Lower half

●

     

Fanfold: Lower half 

→

 Upper half

 

 

 

ATTENTION

 

If one of the following settings is set, this function is not available.

●

     

Multi Image Output

●

     

Color/Monochrome Auto Detection

●

     

The resolution is set to 1200dpi

 

5.  Click the [OK] button.

 

 You are returned to the [TWAIN Driver] dialog box.

 

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_13_01.htm (3 of 4)9/28/2007 2:38:37 PM

Summary of Contents for 6240 - fi - Document Scanner


















































































































































































































































Reviews:

No comments