Fujitsu 565Tx, User Manual

Page: 129 / 179

T r o u b l e s h o o t i n g
L i f e B o o k ™ 5 0 0 S e r i e s f r o m F u j i t s u ™
5
5. Setup utility is set to something other than 5. Revise BIOS settings to set S econdary
CD-ROM for the Secondary Master Controller. Master correctly. (See Main menu and
Secondary Master submenu pages 56–64
for more information.)
6. Wrong drive designator was used for 6. Verify drive designator used by application
CD-ROM in the application. is the same as in use by the operating
system. When the operat-ing system is booted
from a CD-ROM drive designations are
automatically adjusted. (See Boot Options
submenu on pages 63–64.)
7. Windows
®
CD auto insertion function 7. Start the CD from the desktop or applica-
is disabled. tion software or re-enable the Windows CD
auto insertion function. (See CD-ROM
Acces Indicator on page 21 for
more information.)
The CD-ROM Access indicator on the Status 1. The Windows
®
CD auto insertion function 1. This is normal.
Indicator panel blinks at regular intervals when is active and is checking to see if a CD is You can disable this function if you wish.
no CD is in the tray or the CD-ROM drive is ready to run. (See CD-ROM Access Indicator on page 21
not installed. for more information. )
Docking Problems
Notebook does not turn on when installed in 1. Mini-Docking Station AC power is not 1. Provide AC power to the Mini-Docking the
Mini-Docking Station. plugged in. Station.
Problem Possible Cause Possible Solution