S e c t i o n T h r e e
54
Table 3-2 Options and Defaults for the IDE Adapter Submenu
Parameter
Options
Default
Description
Autotype Fixed Disk: [Press Enter]
Allows you to activate a computer e
ff
ort to detect the
type of disk drive connected to the interface.
Type:
Auto, None, 1-14,Rsrv,
Auto 1081 MB
Allows you to configure the interface for almost any
16-39, User
hard drive. The numbers are 39 preset combinations
of parameters. Selecting User lets you set each para-
meter marked with * individually. Otherwise these
fields display the settings determined by the Type
Selection. The total memory capacity associated
with that selection is displayed to the right of
the option selected.
*Cylinders:
A number up to five digits.
When one of the preset combinations
Sets the number of cylinders for the hard drive. This
is selected the value set is displayed but
field can be changed by incrementing or by typing in
cannot be changed from the screen. This
the number followed by the
Enter
key.
field can only be changed from the screen
when Type: is selected as User.
*Head:
A number between
When one of the preset combinations
Sets the number of heads on the hard drive. This field
1 and 16.
is selected the value set is displayed but
can be changed by incrementing or by typing in the
cannot be changed from the screen. This
number followed by the
Enter
key.
field can only be changed from the screen
when Type: is selected as User.
Summary of Contents for 420D
Page 3: ...T a b l e o f C o n t e n t s ...
Page 149: ...I n d e x ...
