S e c t i o n F i v e
104
You cannot access the floppy disk.
A card inserted in the PCMCIA Card slot does
not work or is locking up the system.
1. Security is set to p rotect access to floppy
disk data.
2. Diskette is not loaded correctly.
3. BIOS Setup Utility has Diskette Controller
as Disabled.
4. The Floppy Disk Drive may not be properly
installed.
5. You tried to write to a write protected
diskette.
1. The card is not properly installed.
2. The card may have been installed with an
application running and your notebook doesn’t
know it is there.
3. The software may not have the correct
software driver active.
1. Verify your password.
2 . E j ect disket te and ch eck ori en t a ti on and
re - i n s ert . (See Floppy Disk Drive on pa ge 31.)
3. Revise the Setup Utility Integrated
Peripherals Submenu settings. (See Advanced
Menu on pages 58-61.)
4. Remove and re-install the floppy disk drive.
(See To Install or Remove a Device for the Multi-
function Bay on page 84.)
5. Eject the diskette and set it to w rite enable.
(See pages 31-33.)
1. Remove and re-install the card. (See Installing
a PCMCIA Card on page 79.)
2. Close the application and restart your
notebook.
3. See the software documentation and activate
the correct driver.
Problem
Possible Cause
Possible Solution
Summary of Contents for 420D
Page 3: ...T a b l e o f C o n t e n t s ...
Page 149: ...I n d e x ...
