Fujitsu Ten 86271AJ67A, Technical Support Manual

Page: 18 / 125

18
Specification of Line Diagram
1. Outline
Line Diagram can check the connectivity of devises, the vehicle signals, the
radio reception and rear view camera setting.
2. How to enter Line Diagnostic mode
Procedure:
1. Turn off audio by pressing "PWR" button.
2. While pressing both buttons (a) and (b), press and hold
the button (c) for more than 3 seconds.
Press and hold the button (b) for more than 3 seconds, or turning the
ignition switch from ACC OFF to ON position.
2-1. Enter the Diagnostic mode
2-2
.
Exit the diagnostic mode
(a)
(b)
(c)
Normal Mode
Diagnostic Mode
2-1. Enter
Diagnostic Mode
2-2. Back to
Operation Mode
2. Troubleshooting
PWR button