98
Options Guide
TX200
S3
Rack model
Completion
If you have not removed the server from the rack cabinet, please skip this page.
I
If the server is incorporated in a Classic rack cabinet, you will find a
description on how to install it in the Operating Manual.
Figure 84: Installing the server in a rack cabinet
V
CAUTION!
At least two people are required to install the server in the rack cabinet.
Do not use the handles on the rack front cover to lift the server into the
rack.
Ê
Lower the server from above onto the extended telescopic rails (1).
Ê
Push the server a little way in the direction of the arrow (2) until the hooks of
the telescopic rails engage. The telescopic rails may not be unlocked when
you do this.
Ê
Screw the telescopic rails onto the left- and right-hand sides of the server
using one M3x6 screw on each side (3).
Ê
Reconnect all the cables you disconnected beforehand on the rear of the
server.
Haken
4
3
4
3
1
2
5
