TX200 S3
Options Guide
11
2
Procedure
V
CAUTION!
The actions described in these instructions should only be performed by
technical specialists. Equipment repairs should only be performed by
authorized, qualified staff. Any unauthorized opening and improper
repairs could expose the user to risks (electric shock, energy hazards,
fire hazards) and could also damage the equipment. Please note that
any unauthorized opening of the device will result in the invalidation of
the warranty and exclusion from all liability.
Ê
First of all please familiarize yourself with the safety instructions in the
section
chapter “Safety notes” on page 13
ff.
Ê
Ensure that all required manuals (see
“Additional documentation about the
server” on page 5
) are available, printing out the PDF files if necessary. You
will definitely need the Operating Manual for the server and the Technical
Manual for the system board.
Ê
Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
chapter “Preparation” on page 19
ff.
Ê
Extend or upgrade your server as described in the relevant chapter.
I
The Operating Manual for the server describes how you
install/remove the hot-plug components.
I
Procedures which are identical for the floorstand and rack models are
only described for the floorstand model.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the
chapter “Completion” on page 93
ff.
Ê
Start the operating system and, if necessary, configure it as required (see
the Operating Manual).
