TX200 S3
Options Guide
65
Controller in the PCI slots
Installing a controller (PCI slot 5)
Figure 50: Installing the pull-out aid
Ê
Install the pull-out aid with the controller in the PCI slot 5 and press it
carefully into the associated plug-in location on the system board (1). Ensure
that the rear cover fits into the recess (a).
Ê
Push the green fastening slider over the rear cover’s bracket (2).
Ê
If required, connect the cables to the controller and other components.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the
chapter “Completion” on page 93
ff.
1
2
a
