System expansions
Installing and removing drives
40
A26361-K831-Z100-1-7619
1
1
Ê
Remove the screws.
Ê
Take the new floppy disk drive out of its packaging.
Ê
Replace the floppy disk drive.
Ê
Fasten the drive with the screws.
3
2
1
Ê
Slide the drive into the system unit (1).
Ê
Plug the connectors of the data cable and the power supply cable into the floppy disk drive (3).
Make sure the polarity is correct.
Ê
Fasten the drive with the screw (2).
Ê
Close the system unit (see "
Assembling the system unit
").
i
You may have to check the entry for the drive in the
BIOS Setup
.
