System expansions
Installing and removing drives
38
A26361-K831-Z100-1-7619
Removing an accessible drive
Ê
Open the system unit (see "
Opening the system unit
").
1
3
2
2
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2) and take the drive out of the system unit (3).
!
For cooling, protection against fire and in order to comply with EMC regulations, you must
refit the plastic cover.
Ê
Press the plastic drive cover into the front
panel until it snaps in place.
Ê
Close the system unit (see "
Assembling
the system unit
").
i
You may have to check the entry for the drive in the
BIOS Setup
.
