A26361-K482-Z121-2-7419
English - 3
Converting a tower server into a rack
server
This chapter describes how to convert a tower server into a rack server.
Checking the contents of delivery
The shipment comprises a conversion kit for the rack server and the installation kit for the rack.
Ê
Unpack all the individual parts.
Ê
Check the delivery for damage incurred during transportation.
Ê
Check whether the delivery agrees with the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery note, notify your supplier
immediately.
Conversion kit tower server into a rack server
•
1 Bottom tray (cable tray)
•
1 Front panel
•
3 Spacer angle piece for fixing front panel to server
•
1 Spacer angle piece for fixing front panel to server
•
2 different bottom angle pieces for rear fixing of the server on the bottom tray
•
1 Assembly socket for fixing cable joint carrier on server
•
3 EMC panel
•
1 Drive cage for externally-accessible 5 ¼-inch drives
•
1 Control panel trim plate for externally-accessible drives
•
Screws
-
10 Torx-M4 screws for fixing spacer angle piece, spacer strip
and assembly socket for cable joint carrier
-
3 M5 Phillips screws for fixing the bottom angle pieces
-
8 Countersunk screws (black) for fixing front panel
-
4 Torx-M3 screws for fixing drive cage
-
4 Torx-M3 screws for fixing drives
•
1 Assembly instructions
•
Documentation
