Converting a tower server into a rack server
10 - English
A26361-K482-Z121-2-7419
a
b
1
Ê
Lay the bottom tray on the table with the open side facing up if the bottom tray has an open
rear side, and lay the bottom tray on the table with the open side facing down if the bottom tray
has a closed rear side. The three holes (a) must face the front in both cases and the punch-
outs (b) at the side holes must be positioned as shown in the illustration.
Ê
Lay the server on the bottom tray (1).
1
a
Ê
Mount the three spacer angle pieces for the front panel at the top of the front (1). The stamped
shape (a) on the spacer angle piece is important. This shape must fit into the recess in the
casing.
