Converting a tower server into a rack server
14 - English
A26361-K482-Z121-2-7419
1
2
1
Ê
If the bottom tray is open at the rear and you want to use the cable chain for cable routing, then
use the narrow bottom angle piece shown and two Torx M5 screws (1) and one Torx M4
screws (2) to fix the server to the bottom tray at the rear. In this case the bottom tray remains
open at the rear.
1
Ê
If you want to use the an articulated cable carrier for cable routing, then screw securely screw
the related mounting base to the closed bottom tray at the rear with two Torx M4 screws (1).
