Exiting BIOS-Setup
Troubleshooting and tips
A26391-K113-Z120-5-7619
69
The mouse does not work
If the connected mouse does not work, the following can cause it:
Incorrect setting in BIOS Setup
Ê
Check the setting
Hotplug
in the
BIOS Setup
in the menu
Advanced - Keyboard/Mouse Features
.
The setting must be set to
Enabled
.
Touchpad driver is not installed properly
Ê
Deinstall the touchpad driver.
Ê
Install the actual driver from the "Drivers & Utilities" CD.
Mouse driver is not loaded
Ê
Check whether the correct mouse driver is properly installed and is present before the
application programme is started.
Detailed information can be found in the User guides for the mouse or application programme.
Mouse is not connected
Ê
Switch the notebook off.
Ê
Check whether the mouse cable is correctly connected to the notebook.
If you use an adapter or extension lead with the mouse cable, check the connections.
Ê
Switch the notebook on.
The floppy disk cannot be written
Ê
Check whether the disk is OK and is not write-protected.
The printer does not print
Ê
Make sure that the printer is switched on and is on-line (see the manuals supplied with the
printer).
Ê
Check that the cable connecting the notebook and the printer is connected properly.
Ê
Check that the correct printer driver is installed.
Ê
Check in the
BIOS Setup
whether the
Advanced - I/O Device Configuration
field is set to
Enabled
for the port you are using.
The respective entry in the fields of
Serial port
or
Parallel port
must match the setting in the
application programme under Windows.
The notebook casing gets warm
Your notebook is designed to give off the heat loss of the integrated components via heat
dissipation of the housing surface. Under extreme operating conditions the temperature inside the
casing can reach 60°C.
It is normal for the housing to become warm and is not a reason for concern.
