Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual Download Page 60

Page: 60 / 95

Security functions

Configuring and using fingerprint sensor

A26391-K113-Z120-5-7619

Adding fingerprint

You can add fingerprints to the already registered ones any time, as long as there is enough
memory capacity.

Adding supervisor fingerprint

Call

BIOS Setup

and select the

Security

menu.

Select the

Supervisor Fingerprint Menu

field and mark the

Enable

entry.

Select the

Exit Saving Changes

option in the

Exit

menu.

When rebooting you enter the

SUPERVISOR Fingerprint Security Menu

Press the [

] key.

Press the required fingertip on the fingerprint sensor several times in a row. Follow the
instructions in the BIOS window.

Press the

[Esc]

key.

The notebook restarts.

Adding user fingerprint

Call

BIOS Setup

and select the

Security

menu.

Select the

Supervisor Fingerprint Menu

field and mark the

Enable

entry.

Select the

User Fingerprint Menu

field and mark the

Enable

entry.

Select the

Exit Saving Changes

option in the

Exit

menu.

When rebooting you enter the

SUPERVISOR Fingerprint Security Menu

Press the

[Esc]

key.

The

USER Fingerprint Security Menu

is called.

Press the [

] key.

Press the required fingertip on the fingerprint sensor several times in a row. Follow the
instructions in the BIOS window.

Press the

[Esc]

key.

The notebook restarts.

Deactivating fingerprint sensor

To deactivate the fingerprint sensor you have to be registered as a supervisor and to be logged on
to the system.

Call

BIOS Setup

and select the

Security

menu.

Select the

Supervisor Fingerprint Menu

field and mark the

Enable

entry.

Select the

User Fingerprint Menu

field and mark the

Enable

entry.

Select the

Exit Saving Changes

option in the

Exit

menu.

When rebooting you enter the fingerprint registration menu.

Press the [

] key.

You enter a new menu with two options:

Summary of Contents for CELSIUS Mobile A
































































































Search results

Summary of Contents for CELSIUS Mobile A

Reviews:

Fujitsu Siemens Computers CELSIUS Mobile A, Operating Manual, Page: 60 / 95

Search results

Summary of Contents for CELSIUS Mobile A

Reviews: