Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual Download

Page: 21 / 95

Unpacking and checking the delivery

Preparing the notebook for use

A26391-K113-Z120-5-7619

Connecting the power adapter and switching on the notebook

Connect the power adapter cable to the DC jack (DC IN) of the notebook (1).

Connect the power cable to the power adapter (2).

Plug the power cable into the mains supply (3).

The power indicator

of the notebook lights up. The battery will charge.

Press the Suspend/Resume button (4), and release it again.
The Suspend/Resume button functions like an ON/OFF switch.

The power-on indicator

on the notebook lights up.

After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.

Summary of Contents for CELSIUS Mobile A
































































































Search results

Summary of Contents for CELSIUS Mobile A

Reviews:

Related manuals for CELSIUS Mobile A

Brands by name

Popular brands

Fujitsu Siemens Computers CELSIUS Mobile A, Operating Manual

Search results

Summary of Contents for CELSIUS Mobile A

Reviews:

Related manuals for CELSIUS Mobile A

Brands by name

Popular brands