Display settings
Working with the notebook
A26391-K113-Z120-5-7619
21
Display settings
Setting the desktop area
You can change the screen resolution under
Start - Settings- Control Panel - Display - Settings
and then
selecting from the
Resolution
field.
Adjusting the font size
Under
Start - Settings - Control Panel - Display - Settings
you can choose between a larger and a
smaller font in the
Font size
field.
Adjusting the speed of the mouse pointer
You can change the speed of the mouse pointer under
Start - Settings - Control Panel - Mouse
and
clicking on the
Motion
tab.
Setting the display brightness
You can adjust the brightness of your LCD screen with the keys
[Fn]
and
[F12]
or
[Fn]
and
[F11]
:
With
[Fn]
and
[F12]
, screen brightness will be reduced and with
[Fn]
and
[F11]
increased.
Synchronising the display on the LCD screen and an external monitor
Your notebook supports the simultaneous display on the LCD screen and an external monitor. If the
picture does not appear correctly on the LCD monitor, press the key combination
[Fn]
+
[F10]
several times, or switch the external monitor off and then on again. This achieves good picture
synchronisation.
Battery
The battery is one of the most important components of your notebook. When not plugged into a
mains outlet, the notebook runs on its built-in battery. You can increase the life of the battery by
caring for the battery properly. The average battery life is around 500 charge/discharge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
!
Only use batteries released for your notebook.
Take care not to drop the batteries or otherwise damage their casing (fire risk).
If the rechargeable batteries are defective, they must not be used.
Do not touch the contacts of the batteries.
Never interconnect the positive and negative terminals of a battery.
Used batteries must be disposed of in accordance with local regulations (special waste).
Observe the information on battery storage in the "Important notes" chapter.
