Working with the notebook
LS240 floppy disk drive
32
A26391-K113-Z120-5-7619
Manual removal (emergency removal)
In the event of a power failure or damage to the drive it may be necessary to manually remove the
CD/DVD.
Ê
Switch the notebook off.
Ê
Push a pen or a piece of wire (such as a paper clip) into the opening for manual ejection.
The drive tray is unlocked. You can now pull the drive tray out of the drive.
i
Please see the drive documentation for the location of the opening for manual removal.
LS240 floppy disk drive
!
Never clean the floppy disk drive with cleaning disks. Any attempt would destroy the
read/write head in the disk drive within 20 seconds.
Make sure that no floppy disk is inserted in the floppy disk drive during transport.
Otherwise the eject button may break off and the floppy disk drive will be damaged.
Working with floppy disks
i
Follow the instructions supplied by the vendor of the floppy disks.
3
2
1
5
6
4
7
1 =
Insertion direction
2 =
Label area
3 =
Write protection tab for a 1.44 Mbyte floppy disk
4 =
Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk
5 =
Eject button for inserted floppy disks
6 =
Disk is write-protected
7 =
Disk is not write-protected
