[Unit: inch(mm)]
■
Interface card
■
Front installation type External dimensions
●
OPC-E1-CCL,OPC-E1-DEV
●
OPC-E1-DIO
0.33
(8.4)
5.0(127)
3.13(79.6)
1.87(47.5)
0.43
(11)
0.16
( 4)
5.0(127)
3.13(79.6)
1.87(47.5)
0.43
(11)
PG interface card (OPC-E1-PG) for 5V
When this card is built in the inverter, positioning accuracy will
improve, resulting in reduced positioning time and improved
measuring accuracy by the measuring instrument.
DeviceNet card (OPC-E1-DEV)
Connection with the DeviceNet master unit permits application to
the system that requires operation commands and frequency
settings.
Note1) An external power supply of 24V is needed to use a separately sold
option card.
Note2) The inverter that can be used with the SY card includes special
specifications. When ordering the SY card, please order together
with the inverter in a set.
DIO card (OPC-E1-DIO)
This card allows frequency setting or status monitoring by
exchanging digital signal data with the host controller.
SY card (synchronized operation)
NOTE2)
Using this card allows synchronized operation of the two motors
having a pulse generator (PG).
RS-485 communication card (OPC-F1-RS)
Connection with a host (master) device such as PC or PLC allows you
to control FRENIC-Multi as a subordinate (slave) device. (The card is
added to the RS-485 communication devices for FRENIC-Multi.)
NOTE: This option card cannot be connected with the keypad or a
support loader.
●
Number of connectable devices: 1 host device and 31 inverters
●
Number of ports: 2 ports
●
Electric specifications: EIA RS-485
●
Synchronization method: Start/stop
●
Communication method: Half-duplex
●
Transmission speed (bps): 2400, 4800, 9600, 19200 and 38400
●
Maximum communication distance: 1600ft(500m)
●
Terminating resistor: Built-in
Built-in type
Front installation type
Front installation type
Built-in type
PROFIBUS-DP card (OPC-E1-PDP)
Connection with the PROFIBUS-DP card permits application to
the system that requires operation commands and frequency
settings.
Built-in type
PG interface card (OPC-E1-PG3) for 12V
Incorporating the interface card in the inverter permits accurate
speed control and position control.The interface card can be used
simultaneously with the communication bus for FRENIC-Multi series,
optional DeviceNet card (OPC-E1-DEV), CC-Link card (OPC-E1-
CCL), and PROFIBUS-DP card (OPC-E1-PDP).
Built-in type
0.16
( 4)
Front installation type
Options
