FujiFilm Finepix S3000, Service Manual

Page: 59 / 82

59
The third character from left side of the serial number shows the destination.
4-17. [F12] : End Setting
(Destination setting, USB ID write, Product mode setting)
(1) The setting must always be run when the adjustment software is terminated.
(2) Failure to run Terminal Setting will prevent identification as Mass Storage when the camera is connected to the PC.
(3) USB ID write requires that the USB device (in this case FinePix A205) be unique throughout the world.
(4) For this reason, each device has a unique ID as determined by the USB standard.
(5) If multiple devices with the same USB ID are connected to a single PC, the PC will be unable to identify each
USB device, thus preventing operation.
(6) Automatically written USB IDs are as follows.
Item Details
Repair Date Date information is acquired from the PC and written.
Administrator ID C(43)
Repair Station
U.S.:61(a) SAPPORO:30(0)
Canada:62(b) SENDAI:31(1)
Hawaii:63(c) TOKYO:33(3)
Taiwan:64(d) NAGAYA:34(4)
England:66(f) OOSAKA:35(5)
Germany:67(g) HIROSIMA:37(7)
France:68(h) HUKUOKA:38(8)
Spain:69(i)
Italy:6A(j)
Netherlands:6B(k)
Belgium:6C(l)
Sweden:6D(m)
Switzerland:6E(n)
Norway:6F(o)
Finland:70(p)
Singapore:71(q)
CHAINA:74(t)
Others:7A(z)
Repair Serial No. A serial No. is assigned automatically and written
Repair Station
<Step 1>
Inducing is distinguished from the serial number of the product label.
US / CA / EU / EG / GE / AS MODEL
4.Adjustments