FujiFilm Finepix S3000, Service Manual

Page: 44 / 82

44
FinePix S3000 Service Manual
4.Adjustments
<Step 5>
>> The [Firmware Version check screen (Fig. 5)] is
appears. (Firmware confirmation window)
<Step 6>
Press the "Enter" key of the PC.
>> The [Adjustment Item Select scree(Fig. 6)] is appears.
<Fig. 4>
<Step 4>
<Fig. 5>
<Note>
(1) The firmware version as of September 19th, 2003 is ‘1.15’.
A separate instruction will be issued if the firmware re-
quires upgrading.
<Fig. 6>
After reading the notes, press the "Enter" key of the PC.
>> The [Jig Mode Setting Procedures screen (Fig.4)] is
appear.
1. Set the mode switch to the camera mode.
2. Open the slot cover.
3. Connect the camera and PC with the USB jig and cable.
4. Supply 5.00V + 0.01V by using Battery JIG.
5. Switch-ON the camera power while pressing the shutter
button.
* Keep the shutter release button depressed until the
LCD backlight comes on.
6. Check that the LED at the side of the viewfinder is green.
7. Once completing steps 1 - 6, press the "Enter" key of the
PC.
How to Set Up the Jig Mode