FujiFilm Finepix S3 Pro UVIR Owner'S Manual Download Page 8 | Manualshive

Page: 8 / 73

background image

14

15

Viewfinder display

●

!

The viewfinder will be dark without battery power but brightens after installation of fresh batteries. This is not a
malfunction.

●

!

The LCD panel in the upper part of the viewfinder (focus area and On-Demand Grid Lines) will become paler at high
temperatures and will become darker and respond a little more slowly at low temperatures. However, it will operate
normally again at normal temperatures.

●

!

The LCD panel in the viewfinder display (where the icons and numbers are displayed) will turn dark at high temperatures
and will respond a little more slowly at low temperatures. However, it will operate normally again at normal temperatures.

◆

About Advanced Focusing Screen Display

◆

The new Advanced Focusing Screen Display of the FinePix S3 Pro employs the convenient Vari-Brite
Focus Area display system; it enables clear display of the focus brackets at the selected focus area in
the viewfinder for easy identification. When the finder image is bright, the focus brackets are displayed
in black and when the finder image is dark, the focus brackets are momentarily illuminated in red. The
selected focus area can be identified easily in both bright and dark conditions with this function.
Also, the new Advanced Focusing Screen Display allows the superimposition of On-Demand Grid
Lines. The grid lines can be displayed by using Custom Setting Menu #2 (

➡

P.111). These grids assist

you in composing the frame, in taking landscape pictures or in shifting/tilting PC-Nikkor lenses.

✽

Due to characteristics of the LCD used in the Vari-Brite Focus Area display system, a thin line
outside the selected focus area may also be displayed or the entire viewfinder may be illuminated in
red under certain conditions. These are not malfunctions.

12mm-dia reference
circle for center-
weighted metering area
(P.54)

Focus
indicator (P.36)

Flash ready-light

(P.70)

Exposure compensation value

/ Flash exposure

compensation value (P.63, 73)

Shutter speed

Aperture

Focus area (P.47)

Metering system (P.54)

Multiple exposure (P.52)
AE-L (Auto exposure lock)
indicator (P.41)

Exposure compensation (P.63)

Flash exposure compensation (P.73)

Exposure mode (P.56-62) / Electronic

analog exposure display / Exposure

compensation value display (P.63)

●

Viewfinder information display

On-Demand Grid Lines

(P.111)

Focus area
Spot metering area
(P.54)

Rear display panel

Camera parts and features

■

During playback

100-0009

100-0009

125 F5.6 ISO200

D:AUTO C:STD T:STD S:STD

100-0009

01 / 01 / 2004 12 : 00 AM

WB:AUTO NORMAL 6M F:STD

Media

Press the “FUNC”
button to switch
between functions.

Playback mode

Frame number

Multi-frame playback

Protection

Shutter speed

Aperture

Sensitivity

Recorded pixels

White balance

Date / Time

Erase

Histogram

Sharpness

Tone

Color

Quality

Battery charge indicator

Color space (only AdobeRGB shown)

Film simulation

Dynamic range

«
...
6
7
8
9
10
...
»

Summary of Contents for Finepix S3 Pro UVIR










































































Reviews:

No comments

Related manuals for Finepix S3 Pro UVIR

Brand: laxihub Pages: 82

Brand: 70mai Pages: 60

Brand: Samsung Pages: 24

Brand: Samsung Pages: 100

Brand: Samsung Pages: 107

SL820 - Digital Camera - Compact

Brand: Samsung Pages: 22

SL820 - Digital Camera - Compact

Brand: Samsung Pages: 95

Brand: Samsung Pages: 103

Brand: Samsung Pages: 99

SL502 - Digital Camera - Compact

Brand: Samsung Pages: 102

Brand: Samsung Pages: 98

SL35 - Digital Camera - Compact

Brand: Samsung Pages: 22

Brand: Samsung Pages: 98

SL35 - Digital Camera - Compact

Brand: Samsung Pages: 102

SL201 - Digital Camera - Compact

Brand: Samsung Pages: 98

SL102 - Digital Camera - Compact

Brand: Samsung Pages: 24

Brand: Samsung Pages: 106

SL720 - Digital Camera - Compact

Brand: Samsung Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands