34
35
Basic
P
hotography
2
Single
Area AF
Dynamic
AF
TAKING PICTURES (
P
Auto-Multi Program)
6
Set the metering system selector dial to “
/
”
(Matrix metering).
●
!
Matrix metering indication “
l
” appears in the viewfinder.
●
!
When shooting with the camera held vertically, see the
section on vertical shooting (
➡
P.36).
●
!
Take care not to obscure the lens with your fingers or the
shoulder strap.
7
Set the Exposure mode dial to “
P
” (Auto-Multi
Program).
8
Brace your elbows against your body and hold the
camera with both hands.
9
Position the central focus area over the subject.
●
!
If the subject is outside the focus area, either move the focus
area or take the picture using the AF Lock function (
➡
P.40).
1
Set the focus mode selector switch to “
S
” (Single-
AF Servo).
2
1
Press the “FUNC” button to display the AF
setting on the rear display panel.
2
Press the “F1” button to select “
7
” Single area
AF.
●
!
Make sure to turn the focus mode selector switch until it
clicks into position.
3
1
Unlock the 4-direction button.
2
Press “
d
”, “
c
”, “
a
” or “
b
” to position the
focusing area in the center.
4
Lock the 4-direction button to prevent accidental
improper use.
5
Hold down the release mode switch unlock button
and set the release mode switch to “
,
” (Single-
frame).
●
!
The selected focus area indicator appears on the top display
panel, in the viewfinder display and on the viewfinder screen
(
➡
P.47).
0
1
0
2
0
1
0
2
Continued
