FujiFilm FinePix S1800 Series, Service Manual

Page: 55 / 70

Confidential: FUJIFILM Service Center Use Only
4. Inspection
4-3. Inspection and Factory Settings
Seq
.
Item Mode
Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equip. and jigs
1 External visual
check (1) Observe the camera. (1) Check for damage to the outer
casing.
(2) Check for problems with the clicking
or sliding movement of switches.
(3) Check for dust or fogging in the LCD.
2 Power switch
check Auto mode (1) Plug the DC COUPLER into the
camera and connect the AC-5V.
(2) Insert a SD card and close the
card cover.
(3) Turn the camera on.
(4) If a message prompting the user to
set the date appears, press the button
specified on the right.
(5) Check the LCD screen display
status.
(6) Check for blemishes in the CCD
live image.
(2) SD card for recording checking.
(3) Check that the camera beeps.
(4) <DISP/BACK>
(5) Check that the live image and text is
displayed.
(6) Monitor a very bright subject and
check that
the live image does not dim or darken.
CR0130900U9
3 Zoom
operation
check Auto mode (1) Zoom drive noise.
(2) LCD screen.
(3) Zoom operation (T <-> W). (1) Check that there is no abnormal
noise.
(2) Check that there is no edge blurring
Check that the screen display
accurately tracks zooming.
(3) Check that the zoom moves
smoothly.
4 Shock noise
check in Auto
mode
Auto mode (1) Apply a shock to the camera using
the shock jig.
(1) Check for problems on the LCD
monitor.
(2) Check that the camera recovers from
synchronicity disruption. (Note) Do not
apply shocks directly to the lens or card
cover.
5 Resolution
check
Focusing
check Auto mode (1) Use a macro resolution chart as
the subject.
(2) Set the camera to Macro mode.
(3) Set the flash mode to Flash OFF.
(4) Set-up the camera so the chart
center of the
screen.(Distance:10cm)
(5) Press the shutter button to take a
picture.
(2) Press the 4-way button (left) and
check that
the Macro icon (tulip) appears on the
LCD
monitor.
(3) Press the 4-way button (right) and
check that
the Suppressed Flash icon appears on
theLCD monitor.
(5) The indicator lamp lights green ->
Intermittently lights red(recording) ->
Turns off. ZJ00525-100
6 Checking face
detection
operation Auto mode (1) Set Face Detection to “ON”.
(2) Set up the camera facing the face
detection
chart at a distance of 30 to 40 cm.
(3) Press the S1 button.
(2) Check that the Face Detection icon
is displayed
on the LCD.
(3) Check that the focusing target is
aligned with
a face that has the Face Detection
icon. ZJ01021-100
4-2