FinePix S1500 Service Manual
4-30
4. Adjustments
Confidential: FUJIFILM Service Center Use Only
4-13. End Voltage Adjustment
<Settings used for End Voltage Adjustment>
<Step 1>
Set the digital voltmeter to voltage measurement mode and then connect it to the Power Cable Jig clip.
After checking the digital voltmeter and setting the regulated power supply to 5.0 V, plug the DC COUPLER into the camera.
<Step 2>
Insert the adjustment SD card into the camera, set the Mode dial to "
q
" and then turn the camera on.
<Step 3>
Adjust the voltage from the regulated power supply until 4.09V±0.02V is displayed on the digital voltmeter.
FinePix S1500
DC COUPLER CP-04
Digital voltmeter
Regurated
Power supply
POWER CABLE JIG
