FujiFilm DryPix 7000, Service Manual

Page: 107 / 150

MC-106
006-259-01
11.10.2002 FM3601
MC-106 DRYPIX 7000 Service Manual
■
Reinstalling Procedure
Reinstall in the reverse order of the removing procedure. However perform the
following when installing the scanner unit to the sub-scanning unit.
<INSTRUCTIONS>
When pushing the scanner unit against the positioning plate, push gently without
subjecting it to shock.
(1) Align the scanner unit to the reinstalling position of the sub-scanning unit, and
secure temporarily with the screws.
(2) Push the two positioning brackets and protruded part on the scanner unit against
the sub-scanning unit at the positions shown in the following figure.
(3) Secure the scanner unit with the screws.
FP7C0702.EPS
(1)
[Secure temporarily] 4-BR4x12
(3)
[Tighten] 4-BR4x12
(1)
[Secure temporarily] 4-BR4x12
(3)
[Tighten] 4-BR4x12
(2)
[Push] Scanner unit
(2)
[Push] Scanner unit
Scanner unit
■
CHECK/Adjusting Procedure
• Make sure that there is no gap between the sub-scanning unit positioning plate and
scanner unit positioning parts.
• Make sure that the connectors are connected properly.