FujiFilm DryPix 7000, Service Manual

Page: 94 / 150

MC-93
006-259-02
04.01.2003 FM3978
MC-93 DRYPIX 7000 Service Manual
6.2.2 Adjustment When Replacing Sub-scanning Motor
If the sub-scanning motor (ME1) has been replaced, check/adjust the film conveyance
amount as follows.
(1) Print the grid pattern.
“Service Mode, [2-5] Grid”.
(2) Measure “F” on the printed film and check that it meets the specified value.
FP7C0623.EPS
(Unit: mm)
Position
F
26 x 36 cm size
226.5
±
1.0
35 x 43 cm size
413.0
±
1.2
20 x 25 cm size
225.0
±
1.0
For 35 x 43 cm size
20
Film conveyance
direction
F
(3) If the measured values are not the specified values, adjust the film conveyance
amount.
“Service Mode, [5-2-3] Adjusting subscanner”.