64
Optional Units Manual
7.2
Output Paper
7.2.1
Output Trays
Refer
Which output tray to be used is specified on your Print Server.
For detailed information on how to regard the method of speci-
fication, refer to customer documentation supplied with Print
Servers.
Output Tray
Unnecessary sheets purged by Purge function are ejected to the
output tray.
Refer
For detailed information about the Purge function, refer to "2.2
Output Paper" in the
Printer Unit Manual
.
Angle Change
If output sheets tend to not fully be ejected and this causes Paper Full to be detected frequently, you
need to change the tray angle.
Especially, you will need to change the angle of the tray by changing its position as shown in B when
using the following paper types, that tend to cause Paper Full:
Light-weight (106 g/m
2
or lighter) coated paper
Coated paper whose long edges are 364 mm or longer
Long paper
CAUTION
Never touch the paper output area of the Finisher during operation. It may cause injuries.
Waste staples may come out with output paper. Be careful not to get injured by the staples.
Do not staple punched holes of paper. Sharp points of a staple may cause injuries.
A
B
Output tray
Finisher tray
Booklet tray
