- 57 -
INZ-TN2ZSVS-E
4.3.10 Password setting
The password for moving from <Parameter Mode> to <Maintenance Mode> can be set as follows.
(1) Move the cursor to <10. Password Set.> using the
key, and press the
key.
The screen switches as shown at right.
“0000”
Initial value
“0000 to 9999”
Setting range
(2) Press the
key again, and the cursor moves to the
value to be entered.
(3) Select a digit using the
key, and change the value
using the
key.
Press the
key, and the data is registered and the
previous screen appears again.
The setting has now been completed.
ESC
ESC
ENT
,
ENT
ENT
,
,
Setting complete
• Be sure to record and store your established password just in case you forget it.
Caution on setting
