- 37 -
INZ-TN2ZSVS-E
Make the parameter setting, observing the following.
(1) Move the cursor to <Menu Mode>
→
<7. Parameter
Setting> using the
key, and press the
key.
* See “4.3 Maintenance mode” for details of the maintenance mode.
4.2 Parameter mode
(2) On the Parameter Mode screen that appears, move the
cursor to the item to be set using the
key, and then
press the
key.
• Current Date/Time
: Set current month, date, hour, and minute.
• Key Lock
: Key operations can be disabled.
• Output Hold
: The output can be held during calibration in measurement.
• Reset Av. Output
: The average value can be reset.
• Back Light
: The back light can be automatically turned off in standby mode.
And also OFF time of the backlight can be set.
• To Maintenance Mode : Enter the password for entering the maintenance mode.
Setting item
ESC
ENT
,
