4
EN
Peak and Hold PRO Injector Driver
3. Characteristics
Dimension:
•
Width: 3.54 in (90 mm)
•
Length: 1.77 in (45mm)
•
Height: 4.5 in. (115mm)
•
Material: Anodized Aluminum and Plastic
Electrical characteristcs
•
8 signal inputs
•
8 injectors outputs
•
Peak and hold current individually configurable via FTManager
•
Power supply: from 9 to 30V
•
FuelTech CAN protocol
•
Automotive connector, 26 way.
3.1 Safety
Whenever the Peak and Hold PRO Injector Driver is under operation the case
might warm up, avoid touching when it’s surface is hot.
WARNING
We recommend the Driver to be installed at a ventilated
place.
Summary of Contents for PEAKANDHOLD PRO
