41
FTSPARK
Only one of the possible sources is allowed to broadcast a specific DataID
on the network. If one or more sources are broadcasting the same DataID a
network conflict state is raised.
MeasureID DataID
Description
Unity Multiplier
Broadcast
source (rate)
0x02BA
0x015D
External Ignition Capacitor 2 charge
time – B
uS
1
FTSPARK
50Hz
0x02BC
0x015E
External Ignition Capacitor 3 charge
time – B
0x02BE
0x015F
External Ignition Capacitor 4 charge
time - B
0x02C0
0x0160
External Ignition Error code – B
-
Note 1
FTSPARK
25Hz
0x02C2
0x0161
External Ignition no load outputs – B
-
Note 2
0x02C4
0x0162
External Ignition partial discharge outputs
– B
0x02C6
0x0163
External Ignition damaged outputs – B
0x02C8
0x0164
External Ignition disabled outputs – B
0x02CA
0x0165
External Ignition operation status – B
-
Note 3
0x02CC
0x0166
External Ignition Switch voltage – B
V
0.001
0x02CE
0x0167 External Ignition CPU supply voltage – B
0x02D0
0x0168
External Ignition CPU temperature – B
°C
0.1
0x02D2
0x0169
External Ignition operation time – B
S
0.1
FTSPARK
10Hz
Note 1
-
Bit 0:
Unknown pulse width received by
the FT Ignition Bus.
-
Bit 1:
Incorrect ignition order in semi-
sequential operation.
-
Bit 2:
Over voltage in the high voltage bus.
(external ignition disabled until next power
cycle).
-
Bit 3:
Under voltage in the output drivers
power supply. (external ignition disabled
while condition exists).
-
Bit 4:
Charge circuit unable to charge
capacitors.
-
Bit 5:
Power supply under voltage.
-
Bit 6:
12V switch under voltage.
Note 3
Bit 0:
Internal use
Bit 1:
Internal use
Bit 2:
High power mode enabled
Bit 0: Output #1
Bit 8:
Output #9
Bit 1: Output #2
Bit 9:
Output #10
Bit 2: Output #3
Bit 10: Output #11
Bit 3: Output #4
Bit 11: Output #12
Bit 4: Output #5
Bit 12: Output #13
Bit 5: Output #6
Bit 13: Output #14
Bit 6: Output #7
Bit 14: Output #15
Bit 7: Output #8
Bit 15: Output #16
Note 2
