28
Model
XE322
Work
Q
＆
A
Problem 2 Slippage
Rev.
Procedures
：
1.
There are four situations which cause
slippage.
2.
M12 x P1.75 rod end (fish-eye)
bearing: M12 nut on top must be
tighten enough to the connecting arm
and perpendicular to the rod end
bearing, as shown in figure 1.
3.
Bushing housing: M8 x 50m/m
Socket Head Cap Screw and M8 x 7T
nut on top must be tight enough, as
shown in figure 2.
4.
Cross Bar: M8x30m/m Socket Head
Cap Screw on the cross bar must be
tight enough, as shown in figure 3.
5.
The Belt: This case occurs most
frequently as the belt gets loose after
certain time of usage depending on
the duration and weight of the user.
Refer to replacing the belt for
adjusting the belt tension.
1
2
3
4
