20
Model
XE322
Work
Troubleshooting
The Part 3 Side Cases and the Round Disk
Rev.
Procedures
：
1.
Rubbing noises are the most case
which occurs at this portion. It is
caused either by the round disk off
center or the swing of the round disk,
as shown in figure 1.
2.
If the round disk is off center, take it
apart and resume according to the
procedures for replacing side cases.
3.
If the round disk swings with too
much displacement, take apart side
cases and the round disk, and use
Phillips head screw driver to release
16pcs of 5x16mm tapping screws and
1/4
"
x19mm flat washers, as shown in
figure 2. Put the round disk with cross
bar on the platform and check any
deforms. Deform can be corrected
with force. The displacement due to
the swing of the round disk is within
3 mm prior to shipping.
1
2
3
4
