All rights reserved
19
© FTEmaximal
Multivision
The remote control
Selecting input signals...
It’s very simple.
All you have to do is to press the key of
Desired input belonging to the output
you wish to program. It’s easier than it
seems to be…
Upper keypad indicates output SCART (R7)
And lower keypad output modulator (R9).
Example 1:
Pressing SAT in upper keypad
Signal coming from satellite receiver connected in SAT input (R4)
appears in output R7 that is connected to the main TV set.
LED in front panel F 7 lights in red colour.
Example 2:
Pressing DVD in lower keypad
DVD signal is sent to the output R9 through the modulator (R 9) and from this
output through coax cable to remote rooms.
LED in front panel F 6 lights in green colour.
NOTE: When in both outputs is selected the same input, there is only one
LED lighting between F4 and F8 in ORANGE colour.
Selection buttons in front panel are:
Due to selection buttons in front panel are not separated for each output
programming procedure has two steps.
Upper keypad
Lower keypad
F4 F5 F6 F7 F8 F9
